2014

Cambridge A Level ยท 9702 ยท Paper 1 ยท Multiple choice

Physics 9702/13 Oct/Nov 2014 past paper

Cambridge A Level Physics (9702) Paper 1 (Multiple choice), variant 3, Oct/Nov 2014: the question paper and its official mark scheme, 40 questions, with the grade thresholds. Free to open, no account needed.

Questions
40
Marks
40
Grade A from
30

File names: 9702_w14_qp_13 ยท 9702_w14_ms_13

Grade thresholds for 9702/13 Oct/Nov 2014

The minimum raw marks Cambridge set for each grade on this component (out of 40). Thresholds change every session and variant, so always compare your score with the paper you actually sat.

ABCDE
3025221917

Topics in this paper

Which syllabus chapters 9702/13 Oct/Nov 2014 tested, by marks. Each chapter links to every past-paper question on it.

ChapterQuestionsMarks
Electricity9โ€“
Kinematics5โ€“
Forces, density and pressure5โ€“
Particle physics4โ€“
Dynamics3โ€“
Work, energy and power3โ€“
Deformation of solids3โ€“
Waves3โ€“
Physical quantities and units2โ€“
Superposition2โ€“
Ideal gases1โ€“

Questions in 9702/13 Oct/Nov 2014

  1. Question 1Physical quantities and units

    When the brakes are applied on a vehicle moving at speed v, the distance d moved by the vehicle in coming to rest is given by the expression d = kv 2 where k is a constant. What is the โ€ฆ

  2. Question 2Kinematics

    Which list contains one vector quantity and two scalar quantities? A displacement, weight, velocity B force, acceleration, time C momentum, mass, speed D work, density, energy Space for working

  3. Question 3Electricity

    In the circuit shown, an analogue ammeter is to be recalibrated as a thermometer. The graph shows how the resistance R of the thermistor changes with temperature โ€ฆ

  4. Question 4Physical quantities and units

    The diagram shows part of a thermometer. โ€ฆ

  5. Question 5Electricity

    The resistance R of a resistor is to be determined. The current I in the resistor and the potential difference V across it are measured. The results, with their uncertainties, are โ€ฆ

  6. Question 6Kinematics

    In an experiment to determine the acceleration of free fall g, a ball-bearing is held by an electromagnet. When the current to the electromagnet is switched off, a clock starts and the ball- bearing falls. After falling a distance h, โ€ฆ

  7. Question 7Kinematics

    The diagram shows a velocity-time graph for a mass moving up and down on the end of a spring. Which point represents the velocity of the mass when at the lowest point of its motion? โ€ฆ

  8. Question 8Kinematics

    A ball is released from rest on a smooth slope XY. It moves down the slope, along a smooth horizontal surface YZ and rebounds inelastically at Z. Then it moves back to Y and comes to rest momentarily somewhere on โ€ฆ

  9. Question 9Kinematics

    A man weighs 240 N on Mars where the acceleration of free fall g is โ€ฆ

  10. Question 10Dynamics

    A body experiences a varying resultant force that causes its momentum to vary, as shown in the graph. At which point does the resultant force have the largest value? โ€ฆ

  11. Question 11Dynamics

    A golf ball of mass m is dropped onto a hard surface from a height h1 and rebounds to a height h2. The momentum of the golf ball just as it reaches the surface is different from its momentum just โ€ฆ

  12. Question 12Forces, density and pressure

    A sealed cylindrical steel can is situated below the surface of water. air steel can water What is the origin of the upthrust that acts on the can? A The air pressure in the can is less than the water โ€ฆ

  13. Question 13Forces, density and pressure

    A cylinder of weight W is placed on a smooth slope. The contact force of the slope on the cylinder is R. A thread is attached to the surface of the cylinder. The other end of the thread is fixed. โ€ฆ

  14. Question 14Forces, density and pressure

    A uniform metre rule of mass 100 g is supported by a pivot at the 40 cm mark and a string at the 100 cm mark. The string passes round a frictionless pulley and carries a mass of 20 g โ€ฆ

  15. Question 15Dynamics

    A constant force F, acting on a car of mass m, moves the car up a slope through a distance s at constant velocity v. The angle of the slope to the horizontal is โ€ฆ

  16. Question 16Work, energy and power

    The diagram shows a particle X, with kinetic energy Ek, about to collide with a stationary particle Y. Both particles have the same mass. X Y After colliding, X and Y travel onwards together as a single larger particle. How โ€ฆ

  17. Question 17Work, energy and power

    A box of weight 30 N is released from rest on a ramp that is at an angle of 30ยฐ to the horizontal. The box slides down the ramp so that it falls through a vertical distance of โ€ฆ

  18. Question 18Electricity

    A positive charge experiences a force F when placed at point X in a uniform electric field. The charge is then moved from point X to point Y. Distances r and s are shown on the diagram. uniform electric field โ€ฆ

  19. Question 19Work, energy and power

    A van driver adjusts the force on a vanโ€™s brakes so that the van travels at constant speed down a hill from P to โ€ฆ

  20. Question 20Forces, density and pressure

    Atmospheric pressure at sea level has a value of 100 kPa. The density of sea water is 1020 kg mโ€“3. At which depth in the sea would the total pressure be 110 kPa? โ€ฆ

  21. Question 21Ideal gases

    A student is studying Brownian motion. Using a microscope, she observes particles of smoke in a glass container, illuminated by a strong light. The particles of smoke have a zig-zag path, constantly changing speed and direction. What happens to the โ€ฆ

  22. Question 22Forces, density and pressure

    The diagram shows two liquids, labelled P and Q, which do not mix. The liquids are in equilibrium in an open U-tube. โ€ฆ

  23. Question 23Deformation of solids

    What is meant by the ultimate tensile stress of a material? A the maximum force that can be applied to a bar of the material before it bends B the maximum inter-atomic force before the atomic bonds of the material โ€ฆ

  24. Question 24Deformation of solids

    The graph shows the behaviour of a sample of a metal when it is stretched until it starts to undergo plastic deformation. โ€ฆ

  25. Question 25Deformation of solids

    Two springs, one with spring constant โ€ฆ

  26. Question 26Waves

    Which statement about waves is correct? A All electromagnetic waves travel at the same speed in a vacuum. B Longitudinal waves can be polarised. C The amplitude of a wave is directly proportional to the energy transferred by the wave. โ€ฆ

  27. Question 27Waves

    The variation with distance x of the intensity I along a stationary sound wave in air is shown by the following graph. โ€ฆ

  28. Question 28Waves

    Plane wavefronts in a ripple tank pass through a gap as shown. Q P Which property of the wave will be different at Q compared with P? A velocity B frequency C amplitude D wavelength Space for working

  29. Question 29Superposition

    An organ pipe of length l is open at both ends. Notes are produced by the pipe when stationary waves are set up. The speed of sound in the air column is v. What is the lowest (fundamental) frequency of โ€ฆ

  30. Question 30Superposition

    Interference fringes are produced on a screen by double-slit interference using light of wavelength 600 nm. The fringe separation is 4.0 mm and the separation of the slits is 0.60 mm. What is the distance between the double slit and โ€ฆ

  31. Question 31Particle physics

    Regions of unbalanced charge are produced inside a cloud as shown. โ€ฆ

  32. Question 32Electricity

    The path of an electron with initial speed v in the uniform electric field between two parallel plates is shown. x The vertical deflection x is measured at the right-hand edge of the plates. The distance between the plates is โ€ฆ

  33. Question 33Electricity

    A metal wire of length 0.50 m has a resistance of 12 โ„ฆ. What is the resistance of a wire of length 2.0 m and made of the same material, but with half the diameter? โ€ฆ

  34. Question 34Electricity

    A student found two unmarked resistors. To determine the resistance of the resistors, the circuit below was set up. The resistors were connected in turn between P and Q, noting the current readings. The voltage readings were noted without the โ€ฆ

  35. Question 35Electricity

    A potential divider consists of resistors of resistance R1 and R2 connected in series across a source of potential difference V0. The potential difference across R1 is Vout. โ€ฆ

  36. Question 36Electricity

    An extension lead is used to connect โ€ฆ

  37. Question 37Electricity

    In the circuit shown, the ammeters have negligible resistance and the voltmeters have infinite resistance. โ€ฆ

  38. Question 38Particle physics

    The nucleus of a radioactive isotope of an element emits an alpha particle. The daughter nucleus then emits a beta particle and then the daughter nucleus of that reaction emits another beta particle. Which statement describes the final nuclide that โ€ฆ

  39. Question 39Particle physics
  40. Question 40Particle physics

    Alpha, beta and gamma radiations 1 are absorbed to different extents in solids, 2 behave differently in an electric field, 3 behave differently in a magnetic field. The diagrams illustrate these behaviours. paper 1 mm aluminium 1 cm lead โ€ฆ

Other Physics papers from Oct/Nov 2014

Questions students ask

Where can I get the 9702/13 Oct/Nov 2014 mark scheme?
Open the mark scheme above - it is the official Cambridge scheme for this exact paper (9702_w14_ms_13), and on a wide screen it sits beside the question you are reading.
What was the grade threshold for an A in 9702/13 Oct/Nov 2014?
30 marks out of 40, a C needed 22.
Which topics came up in 9702/13 Oct/Nov 2014?
Mostly Physical quantities and units, Kinematics, Electricity. The full list is in the table above.
Do I need an account to open 9702/13 Oct/Nov 2014?
No. Every paper opens for free without signing in. A free account also saves your pen marks and records your score against the grade thresholds.